Program Audi Q5 2011 5th IMMO Smart Remote with OBDSTAR X300 DP

How to program smart remote keys on a Audi Q5 year 2011 5th Immobilizer system using OBDSTAR X300 DP and RFID adapter via OBD.

obdstar-x300-dp-audi-q5-1

Devices required:

OBDSTAR X300 DP (Key Master DP) full version

VCI interface (included in full package)

OBDSTAR RFID adapter (purchased separately)

1 working key and a new key

obdstar-x300-dp-audi-q5-2

obdstar-x300-dp-audi-q5-3

Procedure:

obdstar-x300-dp-audi-q5-4

Connect VCI with RFID adapter and vehicle

obdstar-x300-dp-audi-q5-5
Select Diag Program->Immobilizer->VW/Audi/Skoda/Seat->Audi->Program Keys

obdstar-x300-dp-audi-q5-6

obdstar-x300-dp-audi-q5-7
Select 5 generation immo->A4L/A5/Q5

obdstar-x300-dp-audi-q5-8
Select Read Immo Data

Turn ignition switch to ON with programmed remote
Communicating
Reading immo data

obdstar-x300-dp-audi-q5-9
save immo data

Select Show Immo Info
Choose Audi Q5 saved file

obdstar-x300-dp-audi-q5-10

obdstar-x300-dp-audi-q5-11
OBDSTAR X300 DP will display vehcile immo data VIN, CS,PIN code, key number etc info

Select Make Dealer Key

obdstar-x300-dp-audi-q5-12
Put a new key into RFID adapter

obdstar-x300-dp-audi-q5-13
If X300 DP display error “failed to connect to RFID”
You must update RFID before make dealer key

How to update RFID firmware?
Go to immo selection menu

obdstar-x300-dp-audi-q5-14
Select RFID Update
Updating firmware

obdstar-x300-dp-audi-q5-15
Firmware finished, the indicator on RFID turns green
Select Make Dealer Key
Choose saved file
Put a new key into RFID
Write data to key
Write success

Select Program Keys->Open Audi Q5 saved file

after recognized by vehicle, the key will be locked and unable to unlock.
Press YES to continue

obdstar-x300-dp-audi-q5-16
Enter key number: 2 and confirm
Turn ignition on and press Enter to go on

obdstar-x300-dp-audi-q5-17
Insert 1st key turn on

obdstar-x300-dp-audi-q5-18
Key number 1/2 already programmed
Insert 2nd new key and turn on ignition for smart system

obdstar-x300-dp-audi-q5-19
key number 2/2 already programmed

obdstar-x300-dp-audi-q5-20
Success to recognize keys
Key lean mode completed and success
Try to start all keys